Navigation:  Engineering > Part Operations >

Copy

Training Manuals Alphabetical Function List Back Print this Topic Previous topicOne level upNext topic
Show/Hide Hidden Text

On this tab the following fields can be viewed:

 

hmtoggle_plus1Add

The Add button is enabled when an Available Operation(s) is selected in the list box.  When the "Add" button is clicked, it copies the operation(s) from the "Selected part number to copy from" to the selected part number.

 

If the field ECP Control Part Operations on System Configuration has a value of:

 

1.  "No", ECP control is not applied.

2.  "XDM", ECP control is applied irrespective of the development cycle of the selected maintained parent part.

3.  "ADM", ECP control is applied except where the development cycle of the selected maintained parent part is "XDM".

4.  "EDM", ECP control is applied except where the development cycle of the selected maintained parent part is "XDM" or "EDM".

5.  "PPM", ECP control is applied if the development cycle of the selected maintained parent part is "PPM", "PM", "PP" or "OBS".

6.  "PM", ECP control is applied if the development cycle of the selected maintained parent part is "PM", "PP" or "OBS".

 

The ECP field is populated with approved ECP numbers where the type of change is specified as Add.

hmtoggle_plus1Available Operations

The "Available Operations" list box is populated when a part number is selected.

 

It is populated with the operation sequence, operation, operation type, run hours, labour rate, overhead rate, cost centre type, cost code, operation description, work centre and work centre description from the Part Operation, Work Centre, Cost Centre and Cost Centre Fin Year Data tables.

 

Multi selection of operations in this list box is possible when you want to add the operation(s) to the "Existing Operations" list box.

hmtoggle_plus1Part Number To Copy From

It is populated with part numbers and descriptions from the Part Operations and Part Master tables where the part number in the Part Operations table is equal to the part number in the Part Master table.  

 

The number of characters to be entered before the list is shown is governed by the value of "populate length" (mandatory when copying).

 

When a part number is entered, the "Available Operations" list box is populated with available operations for the selected part number.

hmtoggle_plus1Show Operation(S)

Active

When checked, it displays operations that are currently active or inactive (inactive with an effective date in the future).  When unchecked, it displays all operations for the selected part.

 

Costed

When checked, only operations that have costs linked to the part are displayed.  When unchecked, it displays all operations for the selected part.

 

Scheduled

When checked, only operations that have been scheduled for a task are displayed.  When unchecked, it displays all operations for the selected part.